Changed directory structure to use pyscaffold

7 files changed, 472 insertions, 0 deletions

diff --git a/docs/Makefile b/docs/Makefile
new file mode 100644
index 0000000..e8b986c
--- /dev/null
+++ b/docs/Makefile
@@ -0,0 +1,177 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = _build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+        @echo "Please use \`make <target>' where <target> is one of"
+        @echo "  html       to make standalone HTML files"
+        @echo "  dirhtml    to make HTML files named index.html in directories"
+        @echo "  singlehtml to make a single large HTML file"
+        @echo "  pickle     to make pickle files"
+        @echo "  json       to make JSON files"
+        @echo "  htmlhelp   to make HTML files and a HTML help project"
+        @echo "  qthelp     to make HTML files and a qthelp project"
+        @echo "  devhelp    to make HTML files and a Devhelp project"
+        @echo "  epub       to make an epub"
+        @echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+        @echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+        @echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+        @echo "  text       to make text files"
+        @echo "  man        to make manual pages"
+        @echo "  texinfo    to make Texinfo files"
+        @echo "  info       to make Texinfo files and run them through makeinfo"
+        @echo "  gettext    to make PO message catalogs"
+        @echo "  changes    to make an overview of all changed/added/deprecated items"
+        @echo "  xml        to make Docutils-native XML files"
+        @echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+        @echo "  linkcheck  to check all external links for integrity"
+        @echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+        rm -rf $(BUILDDIR)/*
+
+html:
+        $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+        @echo
+        @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+        $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+        @echo
+        @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+        $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+        @echo
+        @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+        $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+        @echo
+        @echo "Build finished; now you can process the pickle files."
+
+json:
+        $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+        @echo
+        @echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+        $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+        @echo
+        @echo "Build finished; now you can run HTML Help Workshop with the" \
+              ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+        $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+        @echo
+        @echo "Build finished; now you can run "qcollectiongenerator" with the" \
+              ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+        @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/youtube-podcaster.qhcp"
+        @echo "To view the help file:"
+        @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/youtube-podcaster.qhc"
+
+devhelp:
+        $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+        @echo
+        @echo "Build finished."
+        @echo "To view the help file:"
+        @echo "# mkdir -p $HOME/.local/share/devhelp/youtube-podcaster"
+        @echo "# ln -s $(BUILDDIR)/devhelp $HOME/.local/share/devhelp/youtube-podcaster"
+        @echo "# devhelp"
+
+epub:
+        $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+        @echo
+        @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+        $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+        @echo
+        @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+        @echo "Run \`make' in that directory to run these through (pdf)latex" \
+              "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+        $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+        @echo "Running LaTeX files through pdflatex..."
+        $(MAKE) -C $(BUILDDIR)/latex all-pdf
+        @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+        $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+        @echo "Running LaTeX files through platex and dvipdfmx..."
+        $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+        @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+        $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+        @echo
+        @echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+        $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+        @echo
+        @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+        $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+        @echo
+        @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+        @echo "Run \`make' in that directory to run these through makeinfo" \
+              "(use \`make info' here to do that automatically)."
+
+info:
+        $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+        @echo "Running Texinfo files through makeinfo..."
+        make -C $(BUILDDIR)/texinfo info
+        @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+        $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+        @echo
+        @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+        $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+        @echo
+        @echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+        $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+        @echo
+        @echo "Link check complete; look for any errors in the above output " \
+              "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+        $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+        @echo "Testing of doctests in the sources finished, look at the " \
+              "results in $(BUILDDIR)/doctest/output.txt."
+
+xml:
+        $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+        @echo
+        @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+        $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+        @echo
+        @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/_static/.gitignore b/docs/_static/.gitignore
new file mode 100644
index 0000000..3c96363
--- /dev/null
+++ b/docs/_static/.gitignore
@@ -0,0 +1 @@
+# Empty directory
diff --git a/docs/authors.rst b/docs/authors.rst
new file mode 100644
index 0000000..cd8e091
--- /dev/null
+++ b/docs/authors.rst
@@ -0,0 +1,2 @@
+.. _authors:
+.. include:: ../AUTHORS.rst
diff --git a/docs/changes.rst b/docs/changes.rst
new file mode 100644
index 0000000..257630a
--- /dev/null
+++ b/docs/changes.rst
@@ -0,0 +1,2 @@
+.. _changes:
+.. include:: ../CHANGES.rst
diff --git a/docs/conf.py b/docs/conf.py
new file mode 100644
index 0000000..6467b89
--- /dev/null
+++ b/docs/conf.py
@@ -0,0 +1,238 @@
+# -*- coding: utf-8 -*-
+#
+# This file is execfile()d with the current directory set to its containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+import inspect
+from sphinx import apidoc
+
+
+__location__ = os.path.join(os.getcwd(), os.path.dirname(
+    inspect.getfile(inspect.currentframe())))
+
+package = "youtube_podcaster"
+namespace = []
+namespace_pkg = ".".join([namespace[-1], package]) if namespace else package
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+# sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration -----------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be extensions
+# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = ['sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo',
+              'sphinx.ext.autosummary', 'sphinx.ext.viewcode', 'sphinx.ext.coverage',
+              'sphinx.ext.doctest', 'sphinx.ext.ifconfig', 'sphinx.ext.pngmath']
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+# source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'youtube-podcaster'
+copyright = u'2015, Tom van der Lee'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = ''  # Is set by calling `setup.py docs`
+# The full version, including alpha/beta/rc tags.
+release = ''  # Is set by calling `setup.py docs`
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+# language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+# today = ''
+# Else, today_fmt is used as the format for a strftime call.
+# today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['_build']
+
+# The reST default role (used for this markup: `text`) to use for all documents.
+# default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+# add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+# add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+# show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+
+# -- Options for HTML output ---------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'alabaster'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+# html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+# html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+try:
+    from namespace_pkg import __version__ as version
+except ImportError:
+    pass
+else:
+    release = version
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+# html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+# html_logo = ""
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+# html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+# html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+# html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+# html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+# html_additional_pages = {}
+
+# If false, no module index is generated.
+# html_domain_indices = True
+
+# If false, no index is generated.
+# html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+# html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+# html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+# html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+# html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+# html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+# html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'youtube_podcaster-doc'
+
+
+# -- Options for LaTeX output --------------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+# 'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+# 'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+# 'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass [howto/manual]).
+latex_documents = [
+  ('index', 'user_guide.tex', u'youtube-podcaster Documentation',
+   u'Tom van der Lee', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+# latex_logo = ""
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+# latex_use_parts = False
+
+# If true, show page references after internal links.
+# latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+# latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+# latex_appendices = []
+
+# If false, no module index is generated.
+# latex_domain_indices = True
+
+# -- External mapping ------------------------------------------------------------
+python_version = '.'.join(map(str, sys.version_info[0:2]))
+intersphinx_mapping = {
+    'sphinx': ('http://sphinx.pocoo.org', None),
+    'python': ('http://docs.python.org/' + python_version, None),
+    'matplotlib': ('http://matplotlib.sourceforge.net', None),
+    'numpy': ('http://docs.scipy.org/doc/numpy', None),
+    'sklearn': ('http://scikit-learn.org/stable', None),
+    'pandas': ('http://pandas.pydata.org/pandas-docs/stable', None),
+    'scipy': ('http://docs.scipy.org/doc/scipy/reference/', None),
+}
diff --git a/docs/index.rst b/docs/index.rst
new file mode 100644
index 0000000..62a305d
--- /dev/null
+++ b/docs/index.rst
@@ -0,0 +1,45 @@
+=================
+youtube-podcaster
+=================
+
+This is the documentation of **youtube-podcaster**.
+
+.. note::
+
+    This is the main page of your project's `Sphinx <http://sphinx-doc.org/>`_
+    documentation. It is formatted in `reStructuredText
+    <http://sphinx-doc.org/rest.html>`__. Add additional pages by creating
+    rst-files in ``docs`` and adding them to the `toctree
+    <http://sphinx-doc.org/markup/toctree.html>`_ below. Use then
+    `references <http://sphinx-doc.org/markup/inline.html>`__ in order to link
+    them from this page, e.g. :ref:`authors <authors>` and :ref:`changes`.
+    It is also possible to refer to the documentation of other Python packages
+    with the `Python domain syntax
+    <http://sphinx-doc.org/domains.html#the-python-domain>`__. By default you
+    can reference the documentation of `Sphinx <http://sphinx.pocoo.org>`__,
+    `Python <http://docs.python.org/>`__, `matplotlib
+    <http://matplotlib.sourceforge.net>`__, `NumPy
+    <http://docs.scipy.org/doc/numpy>`__, `Scikit-Learn
+    <http://scikit-learn.org/stable>`__, `Pandas
+    <http://pandas.pydata.org/pandas-docs/stable>`__, `SciPy
+    <http://docs.scipy.org/doc/scipy/reference/>`__. You can add more by
+    extending the ``intersphinx_mapping`` in your Sphinx's ``conf.py``.
+
+Contents
+========
+
+.. toctree::
+   :maxdepth: 2
+
+   License <license>
+   Authors <authors>
+   Changelog <changes>
+   Module Reference <api/modules>
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
diff --git a/docs/license.rst b/docs/license.rst
new file mode 100644
index 0000000..943758d
--- /dev/null
+++ b/docs/license.rst
@@ -0,0 +1,7 @@
+.. _license:
+
+=======
+License
+=======
+
+.. literalinclude:: ../LICENSE