From ae3fa667bda75f11881c9209dc67226f98bcfd95 Mon Sep 17 00:00:00 2001
From: Tom van der Lee <tom@vanderlee.io>
Date: Thu, 17 Sep 2026 11:05:45 +0200
Subject: Add cross-platform Nix flake bootstrap

Adds a flake providing shared modules for NixOS and standalone
home-manager, a copyable NixOS host template, and the OpenSpec
tooling/change scaffolding used to plan this work.
---
 README.md | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 README.md

(limited to 'README.md')

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..881b2e9
--- /dev/null
+++ b/README.md
@@ -0,0 +1,56 @@
+# nix-config
+
+A single Nix flake for provisioning both NixOS hosts and non-NixOS systems (any Linux now; macOS via nix-darwin later) from one shared set of modules.
+
+## Layout
+
+- `flake.nix` — inputs (`nixpkgs`, `home-manager`) and outputs (`nixosConfigurations`, `homeConfigurations`, `formatter`, `devShells`)
+- `lib/` — `mkNixos` and `mkHome` helper functions that build `nixosConfigurations` / `homeConfigurations` entries
+- `modules/nixos/common.nix` — shared NixOS-only system settings applied to every NixOS host
+- `modules/home/` — the shared, cross-platform home-manager profile (shell, git, editor, CLI tools). The same modules are consumed whether activated via a NixOS host's home-manager module or standalone `home-manager switch`
+- `users/tom.nix` — identity/profile file consumed by both `mkNixos` and `mkHome`
+- `hosts/template/` — a copy-source-only NixOS host skeleton; **never** wired into `flake.nix` outputs directly. Copy it to `hosts/<real-hostname>/` when provisioning a real machine
+
+## Installing NixOS on a new machine
+
+This flake does not partition disks for you — do that first, with the standard NixOS installer or manually.
+
+1. Partition and format disks; mount the target filesystems under `/mnt` (including `/mnt/boot` for the ESP if UEFI).
+2. Generate hardware config: `nixos-generate-config --root /mnt`. Keep the generated `hardware-configuration.nix`; discard its `configuration.nix`.
+3. Get this repo onto the installer: `nix-shell -p git && git clone <your-remote-url> ~/nix-config` (requires the repo already pushed to a remote — see Follow-ups below).
+4. Copy the template into a real host: `cp -r ~/nix-config/hosts/template ~/nix-config/hosts/<real-hostname>`.
+5. Edit `hosts/<real-hostname>/configuration.nix`: set `networking.hostName`, pick the correct boot loader stanza, set `system.stateVersion` to the installer's NixOS release.
+6. Replace the stub hardware config: `cp /mnt/etc/nixos/hardware-configuration.nix ~/nix-config/hosts/<real-hostname>/hardware-configuration.nix`.
+7. Add the host to `flake.nix`:
+   ```nix
+   nixosConfigurations.<real-hostname> = lib.mkNixos {
+     hostname = "<real-hostname>";
+     system = "x86_64-linux";
+   };
+   ```
+8. `cd ~/nix-config && git add -A` (flakes only see git-tracked files).
+9. If needed: `export NIX_CONFIG="experimental-features = nix-command flakes"`.
+10. `nixos-install --root /mnt --flake ~/nix-config#<real-hostname>`.
+11. Reboot and remove the install media.
+12. Afterwards, clone the flake to a stable path (e.g. `/etc/nix-config`) so future updates are just `sudo nixos-rebuild switch --flake /etc/nix-config#<real-hostname>`.
+
+## Installing on a non-NixOS system (any Linux, or macOS once supported)
+
+1. Install Nix. Recommended: the [Determinate Systems installer](https://github.com/DeterminateSystems/nix-installer) (flakes enabled by default). The official installer also works, but you'll need to add `experimental-features = nix-command flakes` to `nix.conf` yourself.
+2. `git clone <your-remote-url> ~/nix-config`.
+3. First run: `nix run home-manager/master -- switch --flake ~/nix-config#tom@linux`. After that, `home-manager switch --flake ~/nix-config#tom@linux` works directly.
+
+This only touches your home directory — no sudo required.
+
+## Development
+
+- `nix fmt` — format all `.nix` files with `nixfmt-rfc-style`.
+- `nix develop` — a shell with `statix` and `deadnix` for linting.
+- `nix flake check` — validates `homeConfigurations."tom@linux"` and the other outputs defined here (there are no `nixosConfigurations` yet — see Follow-ups).
+
+## Follow-ups (not covered by this change)
+
+- Push this repo to a remote — required before `nixos-install` can `git clone` it during a real install.
+- Add a real NixOS host once hardware has been partitioned (see workflow above).
+- Add nix-darwin once a real Mac host is being configured.
+- Add secrets management (e.g. sops-nix) — none is set up yet.
-- 
cgit v1.3